Learn everything you need to know about laser cutter water chillers here.

The CW5200 unit contains refrigerator gases and a compressor and actively cools the recirculating water. Suitable for use with laser tubes up to 150W.

Filling
The CW5200 has a capacity of 6 litres and should be filled to just above the cooling coils.

Temperature
Our chiller units are set up to maintain the water temperature at a constant 18 degrees.  The temperature is likely to increase under intensive use and the chiller will alert the user with an alarm sound if the temperature exceeds 25 degrees.

Flow
The chiller unit has its own pump if a chiller unit is fitted the standard pump is no longer required.

The chiller unit monitors the flow rate of water and it will emit a warning sound and light the red alarm bulb if the flow rate is too low, this could be caused by kinks in the water tubing or blockages in the piping, if this error occurs, check all the water pipes for kinks or tight turns and check the water quality, if the water is murky it should be replaced.

Available from UK stock and delivered via courier usually within 2 to 3 working days of your order.

Specifications:

Power Supply: AC 220, 240V 50HZ
Current: 2.4-3.1A
Water capacity: 3.2L
Refrigerant: R134a
Cooling Capacity: 5084 Btu/h

Dimensions: 550mm (L) x 280mm (W) x 430mm (H)
Weight: 26KG
Inlet / Outlet: External Ø10mm brass connector
Drain: Rp 1/2 (DN15)

Not available to purchase online - please contact us to order