Tel: 01422 310800

Important safety information

Using the Laser Cutter

 

  • Never leave the laser cutter unattended.
    Your material may ignite, and an unchecked fire in the laser cutter could be both dangerous and costly.

     
  • Never cut PVC or chlorinated plastic.
    You should always know what material you are cutting, and chlorinated plastics should be avoided because they release chlorine gas when cut.

     
  • Do not try to cut metal in the laser cutter.
    If you wish to mark the metal, please use "Thermark Laser Engraving Spray / Paste"

     
  • Change the cooling water and don't let it get too hot as this will shorten tube life.

 

 

 

Copyright © 2014 HPC Laser LTD. Powered by Zen Cart